Null velocity error

[seaswell@telefonica.net]

Hi, Mohiders.

I'm having a problem with a case study runing only with a Tidegauge and forcing hydrodinamics only by tide.

The model runs perfectly but the results in velocity (U and V) are always null, so there is no solution.

Where the error can be? I've ran a similar case nearby and it works without any problem, and I have the same variables in this one.

Can you help me?

Thanks.

Màrius Tomé

[CampuzanoFJ]

Dear Màrius,

With the information that you provided it´s difficult to help you out... My suggestion would be to try to identify where the problem is. Sometimes if you try to apply directly something you´ve ran in a different location you can have some problems not easy to detect, but you can do it removing modules and keeping it very simple to spot the problem. Good luck, best regards,

Francisco

P.S. If you identify what the problem was/is let us know please.

[administrator@.]

Hi Màrius,

Have you solve this? If not can you post some more info about the options you've selected.
Best regards,
Luis

[seaswell@telefonica.net]

Dear, Luis and Francisco.

Sorry for the delay in my answer, but I was very hurry that day and I finally solved the problem without attending your help.

But thank you, anyway.

[luis_at_mohid.com]

Dear Màrius,

Good.
Cheers,
Luis