StartTimeSerieInput - ModuleTimeSerie -ERR17

MOHID Water forum. Questions and discussion around MOHID Water
sabarbosac@unal.edu.co
MOHID Insider
Posts: 52
Joined: Thu Jan 01, 1970 00:00

StartTimeSerieInput - ModuleTimeSerie -ERR17

Postby sabarbosac@unal.edu.co » Wed Apr 06, 2011 21:44

Hello MOHID USERS

I'm a little confused with my model. My input to the model are a time series of various components of water quality and flow. I have my time serie.dat like this:

TIME_UNITS : SECONDS
SERIE_INITIAL_DATA : 2011 3 1 12 0 0
TIME_CYCLE : 0
HOURS INFLOW(m3/s) OUTFLOW(m3/s) DBO(mg/l) O(mg/l) NO3(mg/l) NH4(mg/l) NO(mg/l)


<BeginTimeSerie>

1.00 17.50 0.00 150.64 2.88 0.38 18.97 5.85
2.00 17.50 0.00 144.94 0.00 0.37 19.06 5.48
3.00 17.50 0.00 144.74 0.00 0.36 19.07 5.47
4.00 17.50 0.00 143.98 0.00 0.43 19.03
...... ........ .. ... .. .. ...

719.00 0.00 0.00 63.92 0.00 0.14 24.12 2.27
720.00 0.00 0.00 64.81 0.00 0.14 24.38 2.22

<EndTimeSerie>

And when I run the program show me this error:

StartTimeSerieInput - ModuleTimeSerie -ERR17


My discharge.dat is

<begindischarge>
NAME : RIO BOGOTA Inflow
DESCRIPTION : Mohid Proyecto Muña test discharge
I_CELL : 31
J_CELL : 7
DEPTHBYGRID : 1
K_CELL : 1
ALTERNATIVE_LOCATIONS : 1
DATA_BASE_FILE : C:\\sergio\\ProyectoMuna\\GeneralData\\TimeSerie.dat
FLOW_COLUMN : 2

<<beginproperty>>
NAME : RIO BOGOTA Outflow
DESCRIPTION : Mohid Proyecto Muña test discharge
I_CELL : 33
J_CELL : 21
DEPTHBYGRID : 1
K_CELL : 1
ALTERNATIVE_LOCATIONS : 0
DATA_BASE_FILE : C:\\sergio\\ProyectoMuna\\GeneralData\\TimeSerie.dat
FLOW_COLUMN : 3


<<beginproperty>>
NAME : biochemical oxygen demand
UNITS : mg/l
DESCRIPTION : biochemical oxygen demand concentration
I_CELL : 31
J_CELL : 7
DEPTHBYGRID : 1
K_CELL : 1
ALTERNATIVE_LOCATIONS : 1
DATA_BASE_FILE : C:\\sergio\\ProyectoMuna\\GeneralData\\TimeSerie.dat
FLOW_COLUMN : 4
<<endproperty>>


<<beginproperty>>
NAME : oxygen
UNITS : mg/l
DESCRIPTION : dissolved oxygen
I_CELL : 31
J_CELL : 7
DEPTHBYGRID : 1
K_CELL : 1
ALTERNATIVE_LOCATIONS : 1
DATA_BASE_FILE : C:\\sergio\\ProyectoMuna\\GeneralData\\TimeSerie.dat
FLOW_COLUMN : 5
<<endproperty>>



<<beginproperty>>
NAME : nitrate
UNITS : mg/l
DESCRIPTION : nitrate concentration
I_CELL : 31
J_CELL : 7
DEPTHBYGRID : 1
K_CELL : 1
ALTERNATIVE_LOCATIONS : 1
DATA_BASE_FILE : C:\\sergio\\ProyectoMuna\\GeneralData\\TimeSerie.dat
FLOW_COLUMN : 6
<<endproperty>>


<<beginproperty>>
NAME : ammonia
UNITS : mg/l
DESCRIPTION : ammonia concentration
I_CELL : 31
J_CELL : 7
DEPTHBYGRID : 1
K_CELL : 1
ALTERNATIVE_LOCATIONS : 1
DATA_BASE_FILE : C:\\sergio\\ProyectoMuna\\GeneralData\\TimeSerie.dat
FLOW_COLUMN : 7
<<endproperty>>

<<beginproperty>>
NAME : particulate organic nitrogen
UNITS : mg/l
DESCRIPTION : particulate organic nitrogen concentration
I_CELL : 31
J_CELL : 7
DEPTHBYGRID : 1
K_CELL : 1
ALTERNATIVE_LOCATIONS : 1
DATA_BASE_FILE : C:\\sergio\\ProyectoMuna\\GeneralData\\TimeSerie.dat
FLOW_COLUMN : 8
<<endproperty>>

<enddischarge>

So i Think that this are my data input but i dont know what is wrong, and other question is where can i put in to the program the output data???

Im a little confused..

Someone can help me.... thaks a lot

sabarbosac@unal.edu.co
MOHID Insider
Posts: 52
Joined: Thu Jan 01, 1970 00:00

Postby sabarbosac@unal.edu.co » Wed Apr 06, 2011 21:47

is wrong, and also i dont know where can i put into the program the output files im a little confused

Someone could help me

Thanks a lot

administrator@.
Site Admin
Posts: 349
Joined: Thu Jan 01, 1970 00:00
Location: Instituto Superior Tecnico - Lisbon - Portugal
Contact:

Postby administrator@. » Mon Apr 25, 2011 08:27



Return to “MOHID Water”

Who is online

Users browsing this forum: No registered users and 5 guests