ModifyRelaxAceleration - Hydrodynamic - ERR10

MOHID Water forum. Questions and discussion around MOHID Water
luis.marton@gmail.com
MOHID Beginner
Posts: 4
Joined: Thu Jan 01, 1970 00:00

ModifyRelaxAceleration - Hydrodynamic - ERR10

Postby luis.marton@gmail.com » Wed Jul 06, 2011 19:10

Dear Frank and Luis,

I'm running an experiment with the currents and large-scale level, however I am facing the following error which I have not found the solution in the forum:

FATAL; INTERNAL; ModifyRelaxAceleration - Hydrodynamic - ERR10.

My experiment is structured as follows:

**** Assimilation_1.dat

<beginproperty>
NAME : barotropic velocity U
UNITS : m/s
DIMENSION : 2

OUTPUT_HDF : 1

<<begin_field>>
DEFAULTVALUE : 0
INITIALIZATION_METHOD : HDF
FILE_IN_TIME : HDF
FILENAME : C:\\Users\\luis\\Documents\\Mohid Studio\\Projects\\Experimento_ES_L1_L2_L3_L4_BES\\L2\\General Data\\Boundary Conditions\\Oceano\\L2-Barotropic_UV-OUT2005.hdf5
TYPE_ZUV : z
<<end_field>>

<<begin_coef>>
DEFAULTVALUE : 1e32
TYPE_ZUV : u
FILE_IN_TIME : NONE
REMAIN_CONSTANT : 1
<<end_coef>>

<endproperty>

<beginproperty>
NAME : barotropic velocity V
UNITS : m/s
DIMENSION : 2

OUTPUT_HDF : 1

<<begin_field>>
DEFAULTVALUE : 0
INITIALIZATION_METHOD : HDF
FILE_IN_TIME : HDF
FILENAME : C:\\Users\\luis\\Documents\\Mohid Studio\\Projects\\Experimento_ES_L1_L2_L3_L4_BES\\L2\\General Data\\Boundary Conditions\\Oceano\\L2-Barotropic_UV-OUT2005.hdf5
TYPE_ZUV : z
<<end_field>>

<<begin_coef>>
DEFAULTVALUE : 1e32
TYPE_ZUV : v
FILE_IN_TIME : NONE
REMAIN_CONSTANT : 1
<<end_coef>>


<endproperty>


<beginproperty>
NAME : water level
UNITS : m
DIMENSION : 2
OUTPUT_HDF : 1

<<begin_field>>
DEFAULTVALUE : 0
INITIALIZATION_METHOD : HDF
FILE_IN_TIME : HDF
FILENAME : C:\\Users\\luis\\Documents\\Mohid Studio\\Projects\\Experimento_ES_L1_L2_L3_L4_BES\\L2\\General Data\\Boundary Conditions\\Oceano\\L2-SLA-OUT2005.hdf5
TYPE_ZUV : z
<<end_field>>

<<begin_coef>>
DEFAULTVALUE : 1e32
TYPE_ZUV : z
FILE_IN_TIME : NONE
REMAIN_CONSTANT : 1
<<end_coef>>

<endproperty>

**** Atmosphere_1.dat

No data.

**** Geometry_1.dat

two domains, with 30 layers Cartesian and sigma with five layers.

**** Hydrodynamic_1.dat

DATA_ASSIMILATION : 1
BRFORCE : 1
BRGEOMETRY : 1

SUBMODEL : 1
MISSING_NULL : 1

TIME_SERIE : 1
TIME_SERIE_LOCATION : ..\\General Data\\Time Series\\TimeSeriesLocation.dat
OUTPUT_TIME : 0 3600

LOCAL_SOLUTION : 5

**** InterfaceSedimentWater_1.dat

<begin_rugosity>
DEFAULTVALUE : 0.0025
<end_rugosity>

**** InterfaceWaterAir_1.dat

No data.

**** Model_1.dat

START : 2005 10 1 0 0 0
END : 2005 10 31 0 0 0
DT : 120
VARIABLEDT : 0
GMTREFERENCE : 0
SPLITTING : Double_Splitting

**** Tide_1.dat

Father Domain.

**** Turbulence_1.dat

VISCOSITY_V : 0.0010
VISCOSITY_H : 5.0000

**** WaterProperties_1.dat

OUTPUT_TIME : 0 3600.
TIME_SERIE_LOCATION : ..\\General Data\\Time Series\\TimeSeriesLocation.dat

BOUNDARYCONDITION : 2
DEFAULTBOUNDARY : 35.3
DATA_ASSIMILATION : 1

When running, it returns the following error:

ModifyRelaxAceleration - Hydrodynamic - ERR10

What can be?

Thank you!

Luis Marton

luis.marton@gmail.com
MOHID Beginner
Posts: 4
Joined: Thu Jan 01, 1970 00:00

Postby luis.marton@gmail.com » Thu Jul 07, 2011 20:54

Hello Luis,

You set the BRFORCE Hydrodynamic.dat and not set the properties \"velocity U\" and \"velocity V\" in the file Assimilation.dat

These speeds are interpolated 3D MERCATOR MOHID to mesh.

Regards,
Luis


Return to “MOHID Water”

Who is online

Users browsing this forum: No registered users and 1 guest