ModifySand - ModuleSand - ERR20

MOHID Water forum. Questions and discussion around MOHID Water
singh.neeraj92@gmail.com
MOHID Beginner
Posts: 16
Joined: Tue Jun 24, 2014 07:19

ModifySand - ModuleSand - ERR20

Postby singh.neeraj92@gmail.com » Mon Jul 07, 2014 10:55

Hello. I am getting the following error while trying to run the model: "ModifySand - ModuleSand - ERR20"
I have made all the necessary changes in the associated module files, as instructed in the Module Sand available at MOHID wiki.
Also, I went through the source code and found the error line:
!Bathymetry
call UnGetGridData(Me%ObjBathym, Me%ExternalVar%Bathymetry, STAT_CALL)
if (STAT_CALL /= SUCCESS_) stop 'ModifySand - ModuleSand - ERR10'

call ModifyGridData(Me%ObjBathym, Me%BatimIncrement%Field2D, Add = .false., &
STAT = STAT_CALL)
if (STAT_CALL /= SUCCESS_) stop 'ModifySand - ModuleSand - ERR20.'

My Sand_x.dat file looks like this:

TRANSPORT_METHOD : MeyerPeter
SAND_DT : 60.
OLD : 0
BATHYM_EVOLUTION : 1
BATIM_DT : 60.
BOUNDARY : 1
DISCHARGES : 0

<beginD90>
NAME : D90
UNITS : m
DESCRIPTION : Diameter below which 90 percent of the particles are finer
FILE_IN_TIME : NONE
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.002
REMAIN_CONSTANT : 1
<endD90>

<beginD50>
NAME : D50
UNITS : m
DESCRIPTION : Diameter below which 50 percent of the particles are finer
FILE_IN_TIME : NONE
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.0005
REMAIN_CONSTANT : 1
<endD50>

<beginD35>
NAME : D35
UNITS : m
DESCRIPTION : Diameter below which 35 percent of the particles are finer
FILE_IN_TIME : NONE
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.00025
REMAIN_CONSTANT : 1
<endD35>

<beginrock>
NAME : bed rock
UNITS : m
DESCRIPTION : Depth from sediment surface below which there is no sediment to be transported
FILE_IN_TIME : NONE
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.5
REMAIN_CONSTANT : 0
<endrock>

SAND_MIN : 0.01
POROSITY : 0.1
DENS_SAND : 2650.
TIME_SERIES : 1
FILTER_SCHEME : Modify Lax
FILTER_RADIUS : 5
FILTER_DT : 600.

Can anyone help me with the solution, please.

Return to “MOHID Water”

Who is online

Users browsing this forum: No registered users and 2 guests