ERR30

MOHID Water forum. Questions and discussion around MOHID Water
h.rabipour@yahoo.com
MOHID Beginner
Posts: 10
Joined: Mon Oct 05, 2015 21:09

ERR30

Postby h.rabipour@yahoo.com » Fri Jun 02, 2017 13:41

Hello
I face this erro while running the project. Please help me.

Atmosphere DT Prediction Method: 1

Vectorial Property wind velocity is now defined in one single block
ConstructPropertyList - ModuleAtmosphere . ERR30
See Documentation on how to implement it
Best Regards;
Haniye.



Dear Haniye,

In the code latest version the wind velocity in module atmosphere and wind stress in module interface water air are configured as:

<beginproperty>
NAME : wind velocity
UNITS : m/s
DESCRIPTION : wind velocity
FILE_IN_TIME : HDF
FILENAME_X : ..\..\GeneralData\BoundaryConditions\....
FILENAME_Y : ..\..\GeneralData\BoundaryConditions\.....
HDF_FIELD_NAME_X : wind velocity X
HDF_FIELD_NAME_Y : wind velocity Y
DEFAULTVALUE : -1.0 0.0
REMAIN_CONSTANT : 1
TIME_SERIE : 1
OUTPUT_HDF : 0
<endproperty>

<beginproperty>
NAME : wind stress
UNITS : N/m2
DESCRIPTION : calculated wind stress X
DEFAULTVALUE : 0.0 0.0
CDWIND : 0.0015
REMAIN_CONSTANT : 0
TIME_SERIE : 0
OUTPUT_HDF : 0
<endproperty>

Instead of being configured with a block for each vector X and Y component. Hope I have been of help. Best regards,

Francisco Campuzano

h.rabipour@yahoo.com
MOHID Beginner
Posts: 10
Joined: Mon Oct 05, 2015 21:09

Re: ERR30

Postby h.rabipour@yahoo.com » Fri Jun 02, 2017 13:49

Hi
I did change for my module atmosphere and again received an error. What should I do?
<beginproperty>
NAME : air temperature
UNITS : ?C
DESCRIPTION : air temperature
FILE_IN_TIME : TIMESERIE
FILENAME : ..\General Data\Boundary Conditions\MeteorologicalData.2.txt
DATA_COLUMN : 2
DEFAULTVALUE : 0.0
REMAIN_CONSTANT : 0
TIME_SERIE : 1
OUTPUT_HDF : 1
<endproperty>

<beginproperty>
NAME : wind modulus
UNITS : m/s
DESCRIPTION : Wind speed of the region
DEFAULTVALUE : 0.3
FILE_IN_TIME : TIMESERIE
FILENAME : ..\General Data\Boundary Conditions\MeteorologicalData.2.txt
DATA_COLUMN : 3
REMAIN_CONSTANT : 0
TIME_SERIE : 1
OUTPUT_HDF : 1
<endproperty>

<beginproperty>
NAME : wind direction
UNITS : ?
DESCRIPTION : wind direction
DEFAULTVALUE : 252
FILE_IN_TIME : TIMESERIE
FILENAME : ..\General Data\Boundary Conditions\MeteorologicalData.2.txt
DATA_COLUMN : 4
REMAIN_CONSTANT : 0
TIME_SERIE : 1
OUTPUT_HDF : 1
<endproperty>

<beginproperty>
NAME : wind velocity
UNITS : m/s
DESCRIPTION : wind velocity
DEFAULTVALUE : 0.0 0.0
REMAIN_CONSTANT : 1
OUTPUT_HDF : 0
<endproperty>



and the error is :
—------------------------ MOHID —---------------------—

AUTHOR : IST/MARETEC, Marine Modelling Group
WWW : http://www.mohid.com


Copyright (C) 1985, 1998, 2002, 2006.
Instituto Superior Tecnico, Technical University of Lisbon
—------------------------ MOHID —---------------------—

Constructing Mohid Water
Please Wait...
—------------------------ MODEL —---------------------—

Constructing : JASK.D.geo
ID : 1
Tidal component Q1 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component O1 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component P1 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component K1 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component 2N2 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component N2 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component M2 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component S2 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
Tidal component K2 in the tidal gauge named nth test
has an amplitude below ZERO
null value is assumed
—------------------— HYDRODYNAMICS —-------------------

Courant Number is : 7.597350
In Grid Cell[i,j] : 12 45

—------------------- WATERPROPERTIES —------------------

Num of Properties : 0

—------------— INTERFACE SEDIMENT-WATER —---------------

Num of Properties : 0


Atmosphere DT Prediction Method: 1

—------------------------ MOHID —---------------------—

Running MOHID, please wait...

forrtl: severe (157): Program Exception - access violation

Image PC Routine Line Source
MOHIDWater_releas 00007FF6CB450640 MODULEHYDRODYNAMI 43295 ModuleHydrodynamic.F90
MOHIDWater_releas 00007FF6CB44A76E MODULEHYDRODYNAMI 24536 ModuleHydrodynamic.F90
MOHIDWater_releas 00007FF6CB4BD79E MODULEHYDRODYNAMI 23730 ModuleHydrodynamic.F90
MOHIDWater_releas 00007FF6CB481119 MODULEHYDRODYNAMI 21601 ModuleHydrodynamic.F90
MOHIDWater_releas 00007FF6CB43D10B MODULEHYDRODYNAMI 21070 ModuleHydrodynamic.F90
MOHIDWater_releas 00007FF6CB4356BB MODULEHYDRODYNAMI 14440 ModuleHydrodynamic.F90
MOHIDWater_releas 00007FF6CB74021E MODULEMODEL_mp_RU 1739 ModuleModel.F90
MOHIDWater_releas 00007FF6CB74360E MOHIDWATER_ip_DOO 1477 Main.F90
MOHIDWater_releas 00007FF6CB742EEA MAIN__ 230 Main.F90
MOHIDWater_releas 00007FF6CBD4FEAC Unknown Unknown Unknown
MOHIDWater_releas 00007FF6CBBA176B Unknown Unknown Unknown
KERNEL32.DLL 00007FFE9B1D15DD Unknown Unknown Unknown
ntdll.dll 00007FFE9BE364AD Unknown Unknown Unknown


Best Regards;
Haniye.

davidbrito
MOHID Advanced user
Posts: 187
Joined: Thu Jan 01, 1970 00:00

Re: ERR30

Postby davidbrito » Mon Jul 31, 2017 21:52

Dear Haniye,

The error now is not on Atmosphere, it is on Tide.

The error message is very descriptive, in your Tide_X.dat file you have tidal components negative.
Search for the station called nth test in that file and correct the values.


Best regards,
David


Return to “MOHID Water”

Who is online

Users browsing this forum: No registered users and 1 guest