MOHID WATER - INTERFACE SEDIMENTWATER

MOHID Water forum. Questions and discussion around MOHID Water
steven.moreno.toro@correounivalle.edu.co
MOHID Beginner
Posts: 1
Joined: Fri Aug 28, 2015 22:57

MOHID WATER - INTERFACE SEDIMENTWATER

Postby steven.moreno.toro@correounivalle.edu.co » Thu Mar 01, 2018 00:44

HELLO,
MY NAME IS STEVEN I FROM COLOMBIA.

I WOULD LIKE TO KNOW :o :( :o :o :
WHAT IS THE RELATIONSHIP TO THE CONCENTRATION OF SEDIMENTS IN SUSPENSION, ENTERED INTO THE WATERPROPERTIES MODULE, WITH THE EROSION AND SEDIMENTATION RATES OF THE INTERFACESEDIMENTWATER MODULE.

IN MY PROJECT I INCOME DIFFERENT CONCENTRATIONS IN THE DROUGHTS OF THE RIVERS AND IN THE BAY OF BUENAVENTURA WITH THE OBJECT OF OBSERVING VARIATIONS IN THE RATES OF EROSION AND SEDIMENTACION, BUT DO NOT ORIGINAN CHANGES.

I WOULD LIKE TO ILLUSTRATE IN THAT PART.

ATTACH THE MODULES USED IN THE PROJECT.

THANK YOU VERY MUCH.


ATMOSPHERE

!Output Options
OUTPUT_TIME : 0 3600
TIME_SERIE_LOCATION : ..\General Data\Digital Terrain\TimeSerieSST.dat

!A property block. this property values given by timeseries

<beginproperty>
NAME : air temperature
UNITS : ºC
DESCRIPTION : temeratura del aire
!FILE_IN_TIME : TIMESERIE
!FILENAME : ..\General Data\Boundary Conditions\MeteoStation.srm
!DATA_COLUMN : 2
DEFAULTVALUE : 26
REMAIN_CONSTANT : 1 !maintain DEFAULTVALUE in time? only used if values not given by timeseries or HDF
TIME_SERIE : 1 !output this property in timeseries (use TIME_SERIE_LOCATION)?
OUTPUT_HDF : 1 !output this property in HDF format (map)?
!<endproperty>

!A property block. this property values are constant in the simulation
<beginproperty>
NAME : cloudy
UNITS : oktas
DESCRIPTION : nubosidad
DEFAULTVALUE : 8
REMAIN_CONSTANT : 1
TIME_SERIE : 1
OUTPUT_HDF : 1
<endproperty>

<beginproperty>
NAME : relative humidity
UNITS : fraction
DESCRIPTION : humedad relativa
DEFAULTVALUE : 0.864
REMAIN_CONSTANT : 1
TIME_SERIE : 1
OUTPUT_HDF : 1
<endproperty>

<beginproperty>
NAME : wind velocity
UNITS : m/s
DESCRIPTION : velocidad del viento
DEFAULTVALUE : 1.2
REMAIN_CONSTANT : 1
TIME_SERIE : 1
OUTPUT_HDF : 1
<endproperty>

<beginproperty>
NAME : wind direction
UNITS : º
DESCRIPTION : direccion del viento
DEFAULTVALUE : -135
REMAIN_CONSTANT : 1
TIME_SERIE : 1
OUTPUT_HDF : 1
<endproperty>
<endproperty>


DISCHARGES


<begindischarge>
NAME : Anchicaya
DESCRIPTION : Enter a short description
I_CELL : 11 !cell discharged
J_CELL : 326 !cell discharged
K_CELL : 1 !cell discharged
ALTERNATIVE_LOCATIONS : 0
DEFAULT_FLOW_VALUE : 152 !constant flow in m3/s (used if no timeseries defined)
SPATIAL_EMISSION : Polygon
SPATIAL_FILE : ..\General Data\Descargas\Anchicaya.xy

!Property block
<<beginproperty>>
NAME : temperature
UNITS : ºC
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 28
<<endproperty>>

!<<beginproperty>>
!NAME : sediment
!UNITS : kg/m3
!DESCRIPTION : Enter a short description
!CONSTANT_CONC : 1
!DEFAULTVALUE : 1
!<<endproperty>>

<<beginproperty>>
NAME : cohesive sediment
UNITS : mg/l
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 75
<<endproperty>>

<enddischarge>

<begindischarge>
NAME : Dagua
DESCRIPTION : Enter a short description
I_CELL : 141 !cell discharged
J_CELL : 385 !cell discharged
K_CELL : 1 !cell discharged
ALTERNATIVE_LOCATIONS : 0
DEFAULT_FLOW_VALUE : 66 !constant flow in m3/s (used if no timeseries defined)
SPATIAL_EMISSION : Polygon
SPATIAL_FILE : ..\General Data\Descargas\Dagua.xy

!Property block
<<beginproperty>>
NAME : temperature
UNITS : ºC
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 28
<<endproperty>>

!<<beginproperty>>
!NAME : sediment
!UNITS : kg/m3
!DESCRIPTION : Enter a short description
!CONSTANT_CONC : 1
!DEFAULTVALUE : 1
!<<endproperty>>

<<beginproperty>>
NAME : cohesive sediment
UNITS : mg/l
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 50
<<endproperty>>

<enddischarge>

<begindischarge>
NAME : Agua_Dulce
DESCRIPTION : Enter a short description
I_CELL : 427 !cell discharged
J_CELL : 410 !cell discharged
K_CELL : 1 !cell discharged
ALTERNATIVE_LOCATIONS : 0
DEFAULT_FLOW_VALUE : 80 !constant flow in m3/s (used if no timeseries defined)
SPATIAL_EMISSION : Polygon
SPATIAL_FILE : ..\General Data\Descargas\Agua_Dulce.xy

!Property block
<<beginproperty>>
NAME : temperature
UNITS : ºC
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 28
<<endproperty>>

!<<beginproperty>>
!NAME : sediment
!UNITS : kg/m3
!DESCRIPTION : Enter a short description
!CONSTANT_CONC : 1
!DEFAULTVALUE : 1
!<<endproperty>>

<<beginproperty>>
NAME : cohesive sediment
UNITS : mg/l
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 30
<<endproperty>>

<enddischarge>

<begindischarge>
NAME : San_Antonio
DESCRIPTION : Enter a short description
I_CELL : 202 !cell discharged
J_CELL : 458 !cell discharged
K_CELL : 1 !cell discharged
ALTERNATIVE_LOCATIONS : 0
DEFAULT_FLOW_VALUE : 20 !constant flow in m3/s (used if no timeseries defined)
SPATIAL_EMISSION : Polygon
SPATIAL_FILE : ..\General Data\Descargas\San_Antonio.xy

!Property block
<<beginproperty>>
NAME : temperature
UNITS : ºC
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 28
<<endproperty>>

!<<beginproperty>>
!NAME : sediment
!UNITS : kg/m3
!DESCRIPTION : Enter a short description
!CONSTANT_CONC : 1
!DEFAULTVALUE : 1
!<<endproperty>>

<<beginproperty>>
NAME : cohesive sediment
UNITS : mg/l
DESCRIPTION : Enter a short description
CONSTANT_CONC : 1
DEFAULTVALUE : 50
<<endproperty>>

!<begindischarge>
!NAME : Sedimentos
!DESCRIPTION : Enter a short description
!I_CELL : 362 !cell discharged
!J_CELL : 8 !cell discharged
!K_CELL : 1 !cell discharged
!ALTERNATIVE_LOCATIONS : 0
!DEFAULT_FLOW_VALUE : 0 !constant flow in m3/s (used if no timeseries defined)
!SPATIAL_EMISSION : Polygon
!SPATIAL_FILE : ..\General Data\Descargas\Sedimentos.xy
!
!
!<<beginproperty>>
!NAME : cohesive sediment
!UNITS : mg/l
!DESCRIPTION : Enter a short description
!CONSTANT_CONC : 1
!DEFAULTVALUE : 150
!<<endproperty>>

<enddischarge>

FREE VERTICAL MOVEMENT

<beginproperty>
NAME : cohesive sediment
SALTINT : 1
WS_TYPE : 1
WS_VALUE : 0.0186
FREEVERT_IMPEXP_ADV : 0
<endproperty>

GEOMETRY

MINIMUMDEPTH : 0.1000
FACESOPTION : 2


!Example of a single 1 layer sigma domain (2D application)
<begindomain>
ID : 1
TYPE : SIGMA
LAYERS : 1
LAYERTHICKNESS : 1.0
DOMAINDEPTH : -99.00
TOLERANCEDEPTH : 0.0500
<enddomain>

HYDRODYNAMIC

TIDE : 1
WIND : 0
WATER_DISCHARGES : 1
BAROCLINIC : 0

!For nested (sub)models
!SUBMODEL : 1
!MISSING_NULL : 1


!Start / Continuous Computation
CONTINUOUS : 0
!SLOWSTART : 7200.0
INITIAL_ELEVATION : 0
INITIAL_ELEVATION_VALUE : 2.0800


!Output Options
TIME_SERIE : 1
!TIME_SERIE_LOCATION : ..\General Data\Digital Terrain\TimeSeriesLocation_16Nov2016.dat
TIME_SERIE_LOCATION : ..\General Data\Digital Terrain\TimeSerieSST.dat
OUTPUT_TIME : 0 3600
BOXFLUXES : ..\General Data\Cajas\Boxes.dat
OUTPUT_TIME : 0 3600


INTERFACESEDIMENTWATER


!Output options
OUTPUT_TIME : 0 3600
TIME_SERIE_LOCATION : ..\General Data\Digital Terrain\TimeSerieSST.dat


!Compute wave effect
!WAVETENSION : 0

!rugosity and erosion/deposition parameter definition
<begin_rugosity>
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.028
<end_rugosity>

<begin_critical_shear_erosion>
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.68
<end_critical_shear_erosion>

<begin_critical_shear_deposition>
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.55
<end_critical_shear_deposition>

<begin_erosion_rate>
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 0.000005
<end_erosion_rate>

!<begin_consolidation_rate>
!INITIALIZATION_METHOD : CONSTANT
!DEFAULTVALUE : 0.1
!<end_consolidation_rate>


!A particulated property
<beginproperty>
NAME : cohesive sediment
UNITS : kg/m2
DESCRIPTION : cohesive sediment mass
PARTICULATE : 1
WATER_FLUXES : 1
EROSION : 1
DEPOSITION : 1
MASS_LIMITATION : 1
MASS_MIN : 0
FILE_IN_TIME : NONE
INITIALIZATION_METHOD : CONSTANT
REMAIN_CONSTANT : 1
DEFAULTVALUE : 4800
TIME_SERIE : 1
BOX_TIME_SERIE : 0
OUTPUT_HDF : 1
<endproperty>

MODEL

START : 2017 10 30 0 0 0
END : 2017 11 03 0 0 0
DT : 8
!SPLITTING : Double_Splitting
VARIABLEDT : 0
MAXDT : 3600
GMTREFERENCE : -5
DT_PREDICTION_INTERVAL : 60

LAGRANGIAN : 0
SEDIMENT : 0
!

TIDE

<begingauge>
NAME : nth test
LONGITUDE : -77.0000 18.0000 29.0000
LATITUDE : 3.00000 51.0000 54.0000
METRIC_X : -77.3083
METRIC_Y : 3.86520
REF_LEVEL : 2.24000
TIME_REF : -7.50000
M2 : 1.520651 -114.952
S2 : 0.40225 -60.4288
K1 : 0.09808 55.3441
K2 : 0.11424 -66.9127
N2 : 0.33671 -148.210
!2N2 : 0.0337913 -178.109
O1 : 0.02393 60.6242
Q1 : 0.00707 55.5307
P1 : 0.03218 148.777
M4 : 0.06304 0.0000
!Mf : 0.0120844 19.3105
!Mm : 0.00728915 10.9072
!Mtm : 0.00193442 24.8173
!MSqm : 0.000278598 23.8563
<endgauge>

** AND VARIOUS MORE


TURBULENCE

OUTPUT_TIME : 0. 3600
!RESTART_FILE_OUTPUT_TIME : 0. 86400.
!RESTART_FILE_OVERWRITE : 1
VISCOSITY_H : 5 !m2/s
MODVISH : smagorinsky
HORCON : 0.2
VISH_REF : 1.000
VISCOSITY_V : 0.00010 !m2/s
!MODTURB : turbulence_equation
!MLD_Method : 2
!TKE_MLD : 1e-5
!RICH_MLD : 0.5
OUTPUT_HDF : 1

WATERPROPERTIES

OUTPUT_TIME : 0 3600
TIME_SERIE_LOCATION : ..\General Data\Digital Terrain\TimeSerieSST.dat
BOXFLUXES : ..\General Data\Cajas\Boxes.dat


!! Parsons formulation k = 0.04 + 0.0088C + 0.054C2/3
!SW_EXTINCTION_TYPE : 2
!!% of the total radiation that reaches the surface water is direct solar radiation
!SW_PERCENTAGE : .6
!!Extinction coefficient for the solar radiation or short wave radiation
!SW_EXTINCTION_COEF : .3333333
!! Only the option constant extinction coefficient is implemented (1).
!LW_EXTINCTION_TYPE : 1
!!% of the total radiation that reaches the surface water is atmospheric radiation
!LW_PERCENTAGE : .4
!! Extinction coefficient for the atmospheric radiation or long wave radiation
!LW_EXTINCTION_COEF : .3333333

!Property block

<beginproperty>
NAME : temperature
UNITS : ?C
DESCRIPTION : No description was given.
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 26
ADVECTION_DIFFUSION : 1
DISCHARGES : 1
OUTPUT_HDF : 1
TIME_SERIE : 1
<endproperty>

!<beginproperty>
!NAME : temperature
!UNITS : ?C
!DESCRIPTION : No description was given.
!FILE_IN_TIME : NONE
!INITIALIZATION_METHOD : BOXES
!FILENAME : ..\General Data\Cajas\Boxes.dat
!BOXES_VALUES : 26 27 26 27
!DEFAULTVALUE : 28
!!REMAINS_CONSTANT : 0
!!BOUNDARY_CONDITION : 1
!ADVECTION_DIFFUSION : 1
!DISCHARGES : 1
!OUTPUT_HDF : 1
!TIME_SERIE : 1
!BOX_TIME_SERIE : 1
!<endproperty>


<beginproperty>
NAME : salinity
UNITS : psu
DESCRIPTION : No description was given.
INITIALIZATION_METHOD : CONSTANT
DEFAULTVALUE : 28
ADVECTION_DIFFUSION : 1
DISCHARGES : 1
OUTPUT_HDF : 1
TIME_SERIE : 1
<endproperty>

<beginproperty>
NAME : cohesive sediment
UNITS : mg/l
DESCRIPTION : No description was given.
INITIALIZATION_METHOD : BOXES
FILENAME : ..\General Data\Cajas\Boxes.dat
BOXES_VALUES : 65 70 75
DEFAULTVALUE : 70
BOTTOM_FLUXES : 1
VERTICAL_MOVEMENT : 1
ADVECTION_DIFFUSION : 1
DISCHARGES : 1
OUTPUT_HDF : 1
TIME_SERIE : 1
<endproperty>

!<beginproperty>
!NAME : cohesive sediment
!UNITS : mg/l
!DESCRIPTION : No description was given.
!INITIALIZATION_METHOD : CONSTANT
!FILENAME : ..\General Data\Cajas\Boxes.dat
!BOXES_VALUES : 65 70 100
!DEFAULTVALUE : 0
!BOTTOM_FLUXES : 1
!VERTICAL_MOVEMENT : 1
!ADVECTION_DIFFUSION : 1
!DISCHARGES : 1
!OUTPUT_HDF : 1
!TIME_SERIE : 1
!<endproperty>

!<beginproperty>
!NAME : cohesive sediment
!UNITS : kg/m2
!DESCRIPTION : cohesive sediment mass
!PARTICULATE : 1
!WATER_FLUXES : 1
!EROSION : 1
!DEPOSITION : 1
!MASS_LIMITATION : 1
!MASS_MIN : 0
!FILE_IN_TIME : NONE
!INITIALIZATION_METHOD : CONSTANT
!REMAIN_CONSTANT : 0
!DEFAULTVALUE : 0.1
!TIME_SERIE : 1
!BOX_TIME_SERIE : 0
!OUTPUT_HDF : 1
!<endproperty>


I THANK A PROMPT ANSWER ...

Return to “MOHID Water”

Who is online

Users browsing this forum: No registered users and 2 guests