MOHID Land Quick Start Tutorial

MOHID Land forum. Questions and discussion related to MOHID Land
lialaporta@gmail.com
MOHID Beginner
Posts: 2
Joined: Mon Jul 14, 2014 15:31

MOHID Land Quick Start Tutorial

Postby lialaporta@gmail.com » Mon Jul 14, 2014 15:37

Hi

I'm having trouble using the tutorial start guide for MOHID Land. I have downloaded and successfully imported the sample solution file (TrancaoSample.zip), but when I try to run the first simulation (Impermeable Watershed), I get an error PRIOR to launch saying "Executable no found! Please check the configuration". I have downloaded the file 3 times and saved it in different locations to try and fix this, without success. Any hints as to what I am missing? Many thanks in advance

Lia

Jauch
Site Admin
Posts: 98
Joined: Thu Jan 01, 1970 00:00

Re: MOHID Land Quick Start Tutorial

Postby Jauch » Mon Jul 14, 2014 18:22

Hello Lia,

Are you running the model from within Mohid Studio?
I can't open it right now, but there is an option in the project configuration that allows you to use a different Mohid Land executable. If this option is checked and the path for the executable is not provided (or is not valid), it will cause this error.

By default, Mohid Studio comes with a Mohid Land executable that is used if this option is not checked.

As soon as I get to the office on morning, I'll take a look into this and will give you a feedback.

Cheers,
Eduardo

davidbrito
MOHID Advanced user
Posts: 187
Joined: Thu Jan 01, 1970 00:00

Re: MOHID Land Quick Start Tutorial

Postby davidbrito » Mon Jul 14, 2014 23:16

Hello Lia,

You have to follow the step in
"Step 1 – Updating the MOHID Land executable"
in page 3 of the Quick-Start Manual for MOHID Manual.

Meaning that you have to download the executable (in zip) from the link provided, save it somewhere (remember where you save it), unzip it, and then go to MOHID Studio menu "Administration" and then "General" button, then click on MOHID Land model and browse to the folder where you saved the executable and select the just saved executable.

That should work fine because that was the executable that works with the project.

Best regards,
David

Jauch
Site Admin
Posts: 98
Joined: Thu Jan 01, 1970 00:00

Re: MOHID Land Quick Start Tutorial

Postby Jauch » Tue Jul 15, 2014 08:29

David was faster ;)

Thanks David.

lialaporta@gmail.com
MOHID Beginner
Posts: 2
Joined: Mon Jul 14, 2014 15:31

Re: MOHID Land Quick Start Tutorial

Postby lialaporta@gmail.com » Tue Jul 15, 2014 10:15

Thanks Eduardo and David.
Somehow my .exe was corrupted when unzipped the first time.
I did it all over again and now it worked :)


Return to “MOHID Land”

Who is online

Users browsing this forum: No registered users and 1 guest