Data file does not exists : *********** ERR02

Discussion around MOHID GUI (managing projects, simulations, etc)
camillecouzi@yahoo.fr
MOHID User
Posts: 33
Joined: Thu Jan 01, 1970 00:00

Data file does not exists : *********** ERR02

Postby camillecouzi@yahoo.fr » Fri Jun 19, 2009 22:34

Hi,
I am trying to run my model with a lagrangian module.
My model runs perfectly without the lagrangian module, but when I put it inside, I get some errors...
The strange thing is that when I put in my lagrangian module:
<<BeginProperty>>
NAME : particulate contaminant
...

It seems to work, however (here is the problem), the particle I want to model is a zooplancton, and when I run my model I get this message:

waterproperties
Num of properties: 0
Data file does not exists : ***********
ModuleEnterData - ConstrucEnterData - ERR02


it seems to come from the waterproperties module...
Here are my modules:

Lagrangian module:
OUTPUT_TIME : 0 3600
OUTPUT_CONC : 2
DT_OUTPUT_TIME : 3600

<BeginOrigin>
!caracterización del tipo de trazadores
ORIGIN_NAME : VirusISA_piojodemar
GROUP_ID : 1
FLOAT : 0 !indica q particula no flota
FLOW : 1 ! flujo del punto de emision (en m3/s)

!Caracterizacion temporal de la emision
EMISSION_TEMPORAL : Continuous
START_PARTIC_EMIT : 2007 7 2 3 0 0
END_PARTIC_EMIT : 2007 7 2 5 0 0
DT_EMIT : 3600 !frecuencia de emisión
POINT_VOLUME : 1 !volumen de la emisión en m3

!Caracterizacion espacial de la emision
EMISSION_SPATIAL : Point
ACCIDENT_METHOD : 0
NBR_PARTIC : 60000 !numero de particulas en cada emisión
POSITION_CELL : -73.56094 -42.62254
DEPTH_METERS : 7 ! profundidad de la emision con respecto a la superficie
BOTTOM_EMISSION : 0
ADVECTION : 0

!Eleccion del modelado
MOVEMENT : NotRandom
COMPUTE_AGE : 1
DENSITY_METHOD : 3 !constante
KILL_LAND_PARTICLES : 1 !Kills particles which are located in a Waterpoint which is not a OpenPoint
MANTAIN_REALTIVE_POSITION : 0 !Check is the user wants to maintain the vertical relative position of the origin
OLD : 0
!SEDIMENTATION : Imposed !o stokes
VOLUME_INCREASE : Double
TVOL200 : 86400 !Time needed for a particle to double volume (segundos)

<<BeginProperty>>
NAME : zooplankton
UNITS : number/100ml
CONCENTRATION : 5
AMBIENT_CONC : 5
OUTPUT_CONC : 2
<<EndProperty>>

<EndOrigin>


This is my waterproperties module:
REFERENCE_DENSITY : 1024.00
BOUNDARY_CONDITION : 5


I have tried with that in my waterproperties module, but I get the same ERR02 error:
<begindensity>
NAME : density
UNITS : mg/m3
DESCRIPTION : densidad
DEFAULTVALUE : 36
INITIALIZATION_METHOD : CONSTANT
CONSTANTADVECTION_DIFFUSION : 0
<enddensity>



So I assume that it does not come from waterproperties module, it is perhaps because when you want to track zooplankton there are different options than when you are modelling particulate contaminant...:roll:

Could you help me?
Thank you in advance for your answer,

Cheers from Chile.

Camille. :D

luis_at_mohid.com
MOHID Developer
Posts: 553
Joined: Thu Jan 01, 1970 00:00
Location: Instituto Superior Técnico - Technical University of Lisbon
Contact:

Postby luis_at_mohid.com » Mon Jun 29, 2009 11:51

Hi Camille,

if you use zooplankton as a lagrangian property, the lagrangian module assumes automatically that you want to run the water quality module in lagrangian mode, thus the model looks for extra information in the input data files (lagrangian and water properties).

For your problem, please use a property like \"particulate contaminant\".

Hope this helps,
Luis


Return to “MOHID GUI (discontinued)”

Who is online

Users browsing this forum: No registered users and 2 guests