Problems in the visualization of sections - Post processor

Discussion around MOHID GUI (managing projects, simulations, etc)
paulo.chambel@hidromod.com
MOHID Advanced user
Posts: 117
Joined: Thu Jan 01, 1970 00:00
Location: Lisbon
Contact:

Problems in the visualization of sections - Post processor

Postby paulo.chambel@hidromod.com » Fri Mar 05, 2010 15:22

Question made by Nuno Vaz.

\"I'm able to see a cross section in post-processor along XZ if I assume the entire domain in the Y direction (lines = 1:80). However, if a choose to see only part of the Y direction (lines = 50:65) the picture disappears.\"
The peace be with you

paulo.chambel@hidromod.com
MOHID Advanced user
Posts: 117
Joined: Thu Jan 01, 1970 00:00
Location: Lisbon
Contact:

Postby paulo.chambel@hidromod.com » Fri Mar 05, 2010 15:25

Nuno,
this is a stupid thing of the post-processor. The tool do always the calculations based in the maximum depth of the entire Y direction. The conseuqence is that the picture is visible but is outside of the zoom done automaticly by the tool. You need to pan uppeard several times (order of 10).

Paulo
The peace be with you


Return to “MOHID GUI (discontinued)”

Who is online

Users browsing this forum: No registered users and 1 guest