Hi!
I have a problem, when I run MOHID GUI it send me the error:
-------------------------MODEL------------------------------------
Constructing :Simulation_1
ID : 1
FATAL; INTERNAL; Read_Final_Hydrodynamic_File: ModuleHydrodynamic. ERR01...
I know that it may be something about the Hydrodinamic file, but I do not get to know where the problem is... I am working with a curvilinear grid and I am forcing the model with free surface elevation data of a point inside my domain.
This is my Hydrodinamic file:
BAROCLINIC : 0
CONTINUOUS : 1
TIDE : 1
ENTERING_WAVE : 0
RADIATION : 0
WATER_DISCHARGES : 1
RESIDUAL : 0
ENERGY : 0
UP_CENTER : 1.0
IMPLICIT_VERTADVECTION : 1.0
IMPLICIT_VERTDIFFUSION : 1.0
DISCRETIZATION : 2
UPSTREAM : Upwind
TIME_SERIE : 1
EVOLUTION : Solve_Equations
CORIOLIS : 1
VOLUMEVARIATION : 1
HORIZONTALADVECTION : 1
HORIZONTALDIFFUSION : 1
INITIAL_ELEVATION : 0
INITIAL_VEL_U : 0.0
INITIAL_VEL_V : 0.0
VERTICALADVECTION : 1
VERTICALDIFFUSION : 1
VELTANGENTIALBOUNDARY : 1
VELNORMALBOUNDARY : 1
NULL_BOUND_HORADV : 1
TIDEPOTENTIAL : 0
WIND : 0
ATM_PRESSURE : 0
SURFACEWATERFLUX : 0
HMIN_CHEZY : 0.10
VMIN_CHEZY : 0.10
DATA_ASSIMILATION : 0
IMPLICIT_HORADVECTION : 1
RECORDING : 0
MOMENTUM_DISCHARGE : 0
SLOWSTART : 0.0
HMIN_ADVECTION : 0.50
LOCAL_DENSITY : 1
CYCLIC_BOUNDARY : 0
CONSERVATIVE_HOR_DIF : 0
BIHARMONIC : 0
BIHARMONIC_COEF : 1e9
SUBMODEL : 0
MISSING_NULL : 0
DEADZONE : 0
BAROCLINIC_RADIATION : 0
LOCAL_SOLUTION : 1
BOTTOMWATERFLUX : 0
SLIPPING_CONDITION : 1
NONHYDROSTATIC : 0
STATISTICS : 0
OUTPUT_TIME : 0 3600
BRFORCE : 0
CENTRIFUGAL : 1
TIME_SERIE_LOCATION : C:\\MOHID\\ProyectMOHIDcurv\\GUI\\GeneralData\\TimeSerieLocation.dat
This is my TimeSerieLocation.dat file:
File generated by Mohid GIS
DT_OUTPUT_TIME : 3600
MAX_BUFFER_SIZE : 10000
Based on GridData file : C:\\MOHID\\ProyectMOHIDcurv\\GUI\\GeneralData\\DT1.dat
Based on XYZ file : C:\\MOHID\\ProyectMOHIDcurv\\GUI\\GeneralData\\ADCP.xyz
<BeginTimeSerie>
NAME : adcp0
LOCALIZATION_I : 4
LOCALIZATION_J : 950
LOCALIZATION_K : 1
<EndTimeSerie>
Somebody can help me?
And another question: can MOHID create timeserielocation in curvilinear grid? because, I had to do it by hand...
Thanks very much!
TimeSerieLocation in Hydrodynamic file
-
- MOHID Beginner
- Posts: 6
- Joined: Thu Jan 01, 1970 00:00
-
- MOHID Developer
- Posts: 553
- Joined: Thu Jan 01, 1970 00:00
- Location: Instituto Superior Técnico - Technical University of Lisbon
- Contact:
Re: TimeSerieLocation in Hydrodynamic file
Hi,
The error relates with the option CONTINUOUS : 1
This means the model is expecting to continue from a previously run simulation and is looking for the restart file (Hydrodynamic_X.fin, where X is the ID of the previous run).
Hope this helps,
Luis
The error relates with the option CONTINUOUS : 1
This means the model is expecting to continue from a previously run simulation and is looking for the restart file (Hydrodynamic_X.fin, where X is the ID of the previous run).
Hope this helps,
Luis
-
- MOHID Beginner
- Posts: 6
- Joined: Thu Jan 01, 1970 00:00
Re: TimeSerieLocation in Hydrodynamic file
Hi Luis,
Yes, that was my error. I had already fixed it, but thanks anyway!
Eva.
Yes, that was my error. I had already fixed it, but thanks anyway!
Eva.
Return to “MOHID GUI (discontinued)”
Who is online
Users browsing this forum: No registered users and 1 guest