TimeSerieLocation in Hydrodynamic file

Discussion around MOHID GUI (managing projects, simulations, etc)
eva_eca@hotmail.com
MOHID Beginner
Posts: 6
Joined: Thu Jan 01, 1970 00:00

TimeSerieLocation in Hydrodynamic file

Postby eva_eca@hotmail.com » Thu Jun 02, 2011 16:20

Hi!

I have a problem, when I run MOHID GUI it send me the error:

-------------------------MODEL------------------------------------
Constructing :Simulation_1
ID : 1
FATAL; INTERNAL; Read_Final_Hydrodynamic_File: ModuleHydrodynamic. ERR01...



I know that it may be something about the Hydrodinamic file, but I do not get to know where the problem is... I am working with a curvilinear grid and I am forcing the model with free surface elevation data of a point inside my domain.


This is my Hydrodinamic file:

BAROCLINIC : 0
CONTINUOUS : 1
TIDE : 1
ENTERING_WAVE : 0
RADIATION : 0
WATER_DISCHARGES : 1
RESIDUAL : 0
ENERGY : 0
UP_CENTER : 1.0
IMPLICIT_VERTADVECTION : 1.0
IMPLICIT_VERTDIFFUSION : 1.0
DISCRETIZATION : 2
UPSTREAM : Upwind
TIME_SERIE : 1
EVOLUTION : Solve_Equations
CORIOLIS : 1
VOLUMEVARIATION : 1
HORIZONTALADVECTION : 1
HORIZONTALDIFFUSION : 1
INITIAL_ELEVATION : 0
INITIAL_VEL_U : 0.0
INITIAL_VEL_V : 0.0
VERTICALADVECTION : 1
VERTICALDIFFUSION : 1
VELTANGENTIALBOUNDARY : 1
VELNORMALBOUNDARY : 1
NULL_BOUND_HORADV : 1
TIDEPOTENTIAL : 0
WIND : 0
ATM_PRESSURE : 0
SURFACEWATERFLUX : 0
HMIN_CHEZY : 0.10
VMIN_CHEZY : 0.10
DATA_ASSIMILATION : 0
IMPLICIT_HORADVECTION : 1
RECORDING : 0
MOMENTUM_DISCHARGE : 0
SLOWSTART : 0.0
HMIN_ADVECTION : 0.50
LOCAL_DENSITY : 1
CYCLIC_BOUNDARY : 0
CONSERVATIVE_HOR_DIF : 0
BIHARMONIC : 0
BIHARMONIC_COEF : 1e9
SUBMODEL : 0
MISSING_NULL : 0
DEADZONE : 0
BAROCLINIC_RADIATION : 0
LOCAL_SOLUTION : 1
BOTTOMWATERFLUX : 0
SLIPPING_CONDITION : 1
NONHYDROSTATIC : 0
STATISTICS : 0
OUTPUT_TIME : 0 3600
BRFORCE : 0
CENTRIFUGAL : 1
TIME_SERIE_LOCATION : C:\\MOHID\\ProyectMOHIDcurv\\GUI\\GeneralData\\TimeSerieLocation.dat



This is my TimeSerieLocation.dat file:

File generated by Mohid GIS

DT_OUTPUT_TIME : 3600
MAX_BUFFER_SIZE : 10000

Based on GridData file : C:\\MOHID\\ProyectMOHIDcurv\\GUI\\GeneralData\\DT1.dat

Based on XYZ file : C:\\MOHID\\ProyectMOHIDcurv\\GUI\\GeneralData\\ADCP.xyz

<BeginTimeSerie>
NAME : adcp0
LOCALIZATION_I : 4
LOCALIZATION_J : 950
LOCALIZATION_K : 1
<EndTimeSerie>

Somebody can help me?

And another question: can MOHID create timeserielocation in curvilinear grid? because, I had to do it by hand...


Thanks very much!

luis_at_mohid.com
MOHID Developer
Posts: 553
Joined: Thu Jan 01, 1970 00:00
Location: Instituto Superior Técnico - Technical University of Lisbon
Contact:

Re: TimeSerieLocation in Hydrodynamic file

Postby luis_at_mohid.com » Wed Dec 07, 2011 13:15

Hi,

The error relates with the option CONTINUOUS : 1

This means the model is expecting to continue from a previously run simulation and is looking for the restart file (Hydrodynamic_X.fin, where X is the ID of the previous run).

Hope this helps,
Luis

eva_eca@hotmail.com
MOHID Beginner
Posts: 6
Joined: Thu Jan 01, 1970 00:00

Re: TimeSerieLocation in Hydrodynamic file

Postby eva_eca@hotmail.com » Tue Dec 20, 2011 21:08

Hi Luis,

Yes, that was my error. I had already fixed it, but thanks anyway!

Eva.


Return to “MOHID GUI (discontinued)”

Who is online

Users browsing this forum: No registered users and 6 guests